BDS 4″ Lift For 2014 GM 1/2-Ton 4x4s
2014 Chevy/GMC 1500 suspension allows for clearance to run 35″ tires
GM 1/2-ton owners who need to run 35s for the added ground clear ace can now turn to BDS Suspension for the solution.
BDS’ kit utilizes the tried and true high-clearance IFS suspension design with ductile iron replacement steering knuckles and high-clearance crossmembers.
These components establish a suspension geometry that not only performs well on and off-road, but are compliant with the factory traction control systems. The new suspension works seamlessly with the newly redesigned electric power steering system that is standard on the 2014 models.
A 3-piece diff drop kit securely repositions the front differential to correct CV axle angle and allowing for the use of the stock front driveshaft.
Also included in this kit are replacement tie rod ends, longer sway bar links, and brake line brackets, and new gas struts to improve ride quality.
A cast iron 4″ block is used in place of the stock 1.25″ block along with longer u-bolts, brake line bracket and your choice of BDS-5500 or Fox 2.0 gas shocks to lift the rear and level the stance.
This 4″ lift kit meets the National Highway Traffic Safety Administration’s (NHTSA) FMVSS No.126 as to not effect the Electronic Stability Control (ESC) systems.
BDS kits are backed by the Factory Protection Plus Program, a 5-year, 60,000 mile drivetrain warranty, FMVSS No.126 ESC System compliancy, and BDS’s exclusive No Fine Print Warranty.
CONTACT: BDS Suspension; (517) 279-2135