Precise Cuts, High Reliablity, Low Operating Cost
The Spirit II Series plasma cutting/marking systems from Burny Kaliburn, a Lincoln Electric feature three amperage options: The 150-amp Spirit II 150 has the ability to pierce most metals up to 1-inch thick, with a maximum capacity of 1.5-inches. The 275-amp Spirit II 275 can pierce most metals up to 1.25-inches thick and has a maximum capacity of 2.5-inches. The 400-amp Spirit II 400 is able to pierce most metals up to 2-inches thick, with a maximum capacity of 3-inches.
All Spirit II models deliver precise, square, dross-free cuts with 2-degrees or less cut-edge bevel, using up to 78 percent less plasma gas than the competition. Operating costs are also controlled by using the same consumables to cut and mark.
For more information: www.lincolnelectric.com; (888) 355-3213