AEM ANALOG GAUGES
AEM analog gauges feature unbeatable viewing resolution, accuracy and looks.
AEM’s Analog Gauges feature quick response and smooth needle movement that is easy to read in all lighting conditions. Each gauge offers a swept area of 320 degrees for the best viewing resolution at almost any angle.
All AEM analog gauges feature seven backlight colors that allow you to match your OEM or other gauge backlighting, a silver and black bezel and a white and black faceplate to best match the interior of your vehicle. The backlighting is adjustable via a dial on the rear of the gauge to optimize viewing in all lighting conditions.
ANALOG GAUGE FEATURES:
• Ideal for carbureted or EFI vehicles
• Easy-to-install harness and sensor included
• 320-degrees of viewing resolution
• Adjustable backlighting
• Each gauge comes with interchangeable black & silver bezels and black and white gauge faceplates
• 0-5V analog output included for use with data loggers and virtually any engine management system
• Standard 52mm (2-1/16”) gauge housing
ANALOG WATER/OIL/TRANS TEMP GAUGE
PN 30-5140 (100-300 degrees F SAE).
PN 30-5140M (40-148 degrees C Metric).
• Gauge readout measures 100-300 degrees F (30-5140)
• Gauge Readout 40-148 degrees C (30-5140M)
• Brass AEM temperature sensor included
ANALOG FUEL/OIL/AIR PRESSURE GAUGE
Put One on Your Tow Rig to Monitor Air Compressor Pressure Too!
PN 30-5133 (0-100 PSI Fuel/Oil/Air).
PN 30-5135 (0-150 PSI Fuel/Oil).
PN 30-5144 (0-15 PSI Fuel). Made for carbureted applications!
PN 30-5133M (0-6.9BAR Metric Fuel/Oil).
PN 30-5135M (0-10.2BAR Metric Oil).
• Gauge readout measures 0-100 PSI (30-5133)
• Gauge readout measures 0-150 PSI (30-5135)
• Gauge readout measures 0-15 PSI for carbureted apps (30-5144)
• Gauge readout measures 0-6.9BAR Metric (30-5133M)
• Gauge readout measures 0-10.2BAR Metric (30-5135M)
• Brass AEM 100PSIg sensor included (30-5133)
• Brass AEM 150PSIg sensor included (30-5135)
• Brass AEM 15PSIg sensor included (30-5144)
• Brass AEM 7.5BAR sensor included (30-5133M)
• Brass AEM 12BAR sensor included (30-5135M)
UNIVERSAL 52MM SILICONE GAUGE BOOT
Our silicone gauge boot (PN 30-8444) repeals water (not waterproof), and protects your gauge from dust and contaminants.
DIGITAL TO ANALOG WIRING CONVERSION KITS
Visit www.aemelectronics.com for conversion kit part numbers.