BDS 2013 Ram 3500 6″ Lift First Of Its Kind
BDS Suspension continues to lead the industry with new and innovative products for late model RAM trucks.
Their latest release, complete six-inch suspension lift kits for the 2013-newer RAM 3500 4WD trucks is the first lift kit of its kind to hit the market.
This new 6″ lift system uses a pair of specially designed progressive-rate ProRide coil springs for the front lift and five-inch blocks in the rear to provide proper clearance to run up to 37-inch tires.
It also incorporates laser-cut relocation brackets for the radius arms, sway bars and track bars to reposition the factory suspension components for correct suspension geometry and caster at six inches of lift.
These brackets are designed for quick installation and create a stout mounting location to hold up to the heavy load demands truck owners put on their Ram 3500 4x4s.
With the redesigned front end of these trucks, the 6″ lift requires transmission/transfer case relocation components to allow the front driveshaft to function properly.
BDS includes a new laser cut transmission crossmember and adjustable transmission mounting plate to increase clearance. The transfer case is repositioned by way of a supplied indexing ring kit to correct the operating angle of the front driveshaft. (Note: Indexing ring fits 6-bolt transmissions only, not the optional 8-bolt RAM 4500 transmissions).
The kit includes your choice of BDS-5500 hydraulic or Fox 2.0 performance shocks to offer a great ride and improved dampening performance. This kit allows for 37″ tires to be installed.
CONTACT: BDS Suspension; 517- 279-2135
