Work Light Buyer's Guide

Aftermarket Light Buyers Guide

How to select the best aftermarket flood, fog and driving lights for your pickups – for both work and play


by Bruce W. Smith

While the general pickup-driving populace doesn’t make it a habit hitting the road before the roosters rise, the typical contractor is well into their second cup of coffee and headed to the company office or jobsite.

Driving when it’s dark is just part of being in the construction and landscaping trade. So is loading tools, gear and trailers before sunrise or after sunset whether it’s work-related or recreational. In short, those who use pickups for both work and play don’t let daylight dictate their plans.

That’s why auxiliary lights are so important. Not only do these products add more functionality and utility value to whatever it is they are mounted on, they bring an additional level of safety to the picture.


But that doesn’t mean you should blindly rush out to the nearest discount auto parts store and buy the first set of auxiliary lights you lay eyes on. Choosing which auxiliary lights to install on a pickup entails a few more considerations than slapping on the cheapest box of lights available.

Instead, target specific types of lights that will make things safer and easier as you drive or work around your pickup.

Choosing the “right” auxiliary light upgrades could be as simple as one set of fog lights – or an array of several different types of lights. It all depends on your particular needs.

And if it’s price holding you back from investing in auxiliary lights, consider this: Lights are the one aftermarket accessory that’s easily moved from vehicle to vehicle regardless of make or model. So your initial investment should last for years.


Speaking of investment, auxiliary lights tend to be priced in line with the quality of the product and technology. For example, quartz-halogen lights are less expensive than lights of similar function utilizing LED (Light-Emitting-Diode)- or HID (High-Intensity-Discharge)-based technology.

The price of both LED and HID auxiliary lights is coming down and getting more competitive with the halogen variety, which is great news for pickup owners.

If you aren’t familiar with the LED and HID lights, understanding how they work and what they contribute to a pickup’s utility and driver safety is important in making your purchase decision.

Your run-of-the-mill lights run electricity through a filament surrounded by a gas, such as halogen. As the filament heats up and burns it produces light. But because the heart of the bulb is a wire, it will eventually burn in half or break from vibration.


The light output and efficiency of such lights don’t stack up against that produced by HID or the newest generation of LEDs.

HID-based lights don’t have filaments. Instead, an internal or external ballast builds up the power to create light when an arc jumps between two electrodes, stimulating a special mixture of Xenon gases to produce a brilliant, almost blue-white light that’s about three times brighter than a halogen bulb emits. Think lightning in a bottle.

The benefit of HID lighting is it has a much longer life expectancy than halogens while being very efficient, requiring about a third less power than conventional bulbs of comparable output. And the light color is that of sunlight, which makes it easier to see both detail and longer distance compared to conventional halogen lighting.

The downside: Most HIDs are designated for “off-road use” only, and they are usually more expensive compared to lights of similar output/function.

Ford SUper Duty outfitted with JW Speaker TS3000R LED driving lights.


LED auxiliary light technology has really advanced in the last couple years. The prices have come way down, the light output gone way up. They’re also available in all types of functions and configurations from tool box lights to fog/work lights and driving lights. They come in a variety of shapes and sizes, too, from round and rectangular lights to light bars several feet long.

An LED light is basically a group of small crystals that light up when electricity is applied. They key to their brightness and light output is the size and number of crystals used, the makeup of the crystals, the design of the epoxy surrounding the crystal, and the lens used to direct the light.

What makes LED lights ideal for pickups used in the construction and off-road environments is they are not prone to death by vibration or the elements.

“Advanced white LED technology offers substantially longer life than comparable incandescent lamps (50,000 hours vs. 400 hours),” says Truck-Lite’s Jamie Lindemuth. “Essentially, this equates to nearly six years of non-stop, continuous use. Given that, the lifespan of Truck-Lite LED products will most likely out-live the vehicle.”

LEDs also require about 85-percent less amperage to power than hologens, saving added wear on batteries and alternators.


Light type and price aside, it’s the function of the lights added to your pickup/trailer package that makes the difference.

Many years of driving in a multitude of weather conditions over vast types of terrain has taught me the typical contractor’s pickup used for work and play needs a minimum of two types of auxiliary lights: fog and driving.

Fog-type lights, with their wide, flat pattern, are worth their weight in gold when the weather turns sour – or you need to see more of the road closer to the front and off to the sides.

Well-designed fog lights throw light out about 100 feet with an even spread across both lanes of a two-lane road as well as a dozen yards off the shoulders. The good ones also have a distinct cut-off along the top of the light beam that prevents light glaring back in your eyes when thick fog, rain or snow reek havoc on visibility.

When it comes to lens color, amber is hard to beat.

Fog lights also work great in two other applications: as work lights and reverse lights. Their broad light pattern does a superb job illuminating a larger area close to the vehicle such as when winching, working in the bed or loading a trailer.


When it comes to driving, be it paved road or gravel, nothing helps relieve eye-strain better than a good set of driving lights.

Driving, or spot-beam lights throw out a tight, well-focused light pattern that can light reflectors up to a mile away in some applications. (Check local/state vehicle laws to make sure they are legal for use.)

Like fog lights, quality and technology make a difference in driving lights. HID driving lights, for example, can reach out hundreds of feet farther than conventional headlights. And there are some dual-pattern driving lights that can be switched between a long-range pencil beam and a mid-range road light.

Driving lights are also where the watt-wars and candlepower sales pitches flourish. Be a smart buyer – don’t fixate on those big numbers (read sidebar, “Watts Better” for an explanation). Rather, concentrate your shopping on 1) lumens-per-watt efficiency, 2) the quality of the housing and mounting system, and 3) the type of beam it projects.


The inclusion and quality of the wiring kit supplied with the lights is also important. The better the kit, the less time you waste during installation or making repairs down the road. Quality light kits provide everything needed to install the lights so they are wired properly.

Look for plug-and-play light kits that include pre-assembled wiring harnesses with relay, switch, and connectors already in place. Cheaper kits may only include the lights, leaving you to figure out the rest.

One thing you don’t want happening is auxiliary lights overloading the pickup’s electrical system; tripped circuit breakers, blown fuses and melted switches are just a tiny step away from a costly electrical fire.

The right lights on a work truck can greatly improve safety at night.


It’s also prudent to be smart about where you mount auxiliary lights. Mount them where they do the most good, and where possible, run the wiring inside racks and behind bumpers where the wires are protected. Don’t scrimp on the use of split-wire loom, either.

Placing driving lights above the cab looks all Baja-cool, but the high-mount positioning renders them almost worthless in snow, dust, rain or fog because their beams of intense light reflect off the moisture and right back into the your eyes. Keep driving lights at or below the headlights position.

Work lights, on the other hand, function best mounted up high. And if used as reverse lights, mounting them right into the tailgate or rear bumper works well.

Fog lights work best mounted in or on the bumper where their beam can cut just under that of the low-beam headlight’s pattern.

Also be conscientious toward your fellow drivers: Fog lights should be aimed so the beam is no higher than low-beam headlights and angled slightly to the left/right of center. Driving lights should be aimed to match your pickup headlight’s high-beam and centered down the middle of the road for maximum efficiency.


You purchase quality work tools that last and you’ve spent a good bit of money on the pickup you’re driving. Do the same when you buy lights. Leave the cheap plastic and pot-metal models to those who don’t depend on their pickups as part of their daily work needs.

Strong housings that will not rust or come apart under tough conditions are a must. So are lights with wiring kits made from heavy-duty components. Check out the light’s warranty, too: The longer the warranty, the better the product.

Now that we’ve shed a little light on the topic of auxiliary lighting, we’ve included an assortment of the newest products to consider adding to your pickup – or fleet of pickups. Mix, match and enjoy the new view. (You can also get more lighting information by going to


Some manufacturers lead buyers to believe there’re only two terms that matters when it comes to the quality of aftermarket lights: watts and candlepower. Both are very misleading.

Watts is only a measurement of current draw (Volts x Amps= Watts); it’s the automotive equivalent of how many gallons of fuel-per-hour an engine uses – not the miles-per-gallon the engine in the pickup delivers driving down the road.

For example, a 100-watt HID driving light is far more effective lighting up the road than a single 100-watt light bulb sitting on the bumper. The difference is in how the bulb’s light output is focused, which brings up another misleading marketing term: candlepower or candela.

Candlepower (aka candela) is an antiquated measurement of light output at the source (radiance) and has nothing to do with how that light illuminates an object.

Lumens, on the other hand, is a true measurement of a light’s efficiency at lighting up an object at a specified distance and is fast becoming the world standard for light comparisons. The higher the lumens, the more useable light being produced.

So when you find auxiliary lights to fit your needs that consume the same or less power, exhibit similar design qualities, and deliver a higher lumen output than a comparable model, you know which to buy. –BWS

Auxiliary Lights Product Showcase


The 10 LEDs in these 7-inch Auxiliary Flood Lights from Truck-Lite disperse a crisp, wide, even light pattern with 1,600 lumens output. Advanced white technology and fully encapsulated design is said to deliver 10,000 hours life expectancy inside the aluminum housing and polycarbonate lens.


Truck-Lite’s 4-inch LED Spot Lights provide a targeted beam to brightly illuminate the road or jobsite with an even pattern not found in conventional spot-beam driving lights. The six LEDs produce 450 lumens and they are housed in a die-cast aluminum housing with white, chrome or black finish. Polycarbonate lens. 5-year limited warranty.


The trapezoidal light pattern of these 4-inch Truck-Lite six-LED Work Lights provides a targeted beam to brightyly illuminate the entire work area. With 400 lumens of output, these 12-volt compact lights deliver full brightness between 8.5V and 16V. Sturdy aluminum housing, polycarbonate lens, stainless mounting hardware and powder-coated finishes contribute to five-year limited warranty.


These flexible LED lights from Truck-Lite are the perfect solution for adding extra clearance lights around trailers and other applications. The 36-Series Flex-Lite clearance lights are mounted on a special housing that attaches with heavy-duty adhesive. No drilling. Side or rear-exit wiring.


Eagle Eye Light’s new 6-inch-round, internal-ballast HID6108 lights ($159/ea) are the least expensive 50W HID light on the market according to the manufacturer. The Slim Ballast technology integrated inside the lights keep them less than two-inches deep from the center of the mounting bolt back. Powder-coated steel housing; available in spot, driving, or a flood beam pattern.


The 1630NW is Eagle Eye Light’s 6-inch Slim 100W Super White halogen series driving lights ($90/pr) have a slim depth of three inches so they work great on a lot of different applications. The color temperature is a whiter, brighter halogen. Titan finish (darkened gunmetal finish); protective grille guard.


Durable and compact, Eagle Eye Lights’ 1864BW 4-inch driving light ($44/pr) can fit into a wide variety of spots on the vehicle. The driving beam is crisp and the light output is great for the size of the light. It is also available in 35W ($129/ea) or 50W ($149/ea) external-ballast HID.


Although JW Speaker’s Model 282 12/24V LED lamp is billed as a low-profile dome or compartment lamp, it also works super as a bed or bed rack rail light because it provides lots of light with a wide, uniform dispersion. Low amp draw. Available with a clear (shown), hazed or semi-frosted lens.


A dozen LEDs mounted inside a heavy-duty die-cast aluminum housing, protected by both glass and polycarbonate lenses, make JW Speaker’s Model 735 LED Work Lights hard to beat in style and performance. The 5 ¾-inch oval lights produce 1,400 lumens and are available in flood, trap(azoidal) and spot pattern. Work great as back-up lights, too. 4-year limited warranty.


Radio remote-control and an optional snap-on flood lens gives GoLight’s Stryker Series spotlights an edge on the competition. Exclusive Cr5 Pentabeam II Technology produces 500,000 candlepower at 5.5 amps, reaching out more than a half-mile. Magnetic or fixed roof-mount; 370-degree rotation. 5-year limited warranty.


Designed for construction vehicles, tow trucks, forklifts and utility vehicles, Superior Signals’ Illuminator Series SYHD5200 ($180) is a 5-inch 35W Xenon HID flood-light putting out 3,200 lumen at 3.5 amps. Tough black plastic housing, with a Borosilicate toughened glass lens, stainless steel mounting hardware and internal integrated ballast.


Evo Prime 620 ($570) is just 11 inches long, yet the six 10-watt LEDs in Vision X Off Road’s aluminum light bar combine to produce 5,160 lumens at 5 amps. The LED bars are available in various lengths (5- to 40-inch) and beam (20- to 60-degree) configurations. Vision X claims Evo-Prime offer the lowest amp-draw-per-lumen output.


Warn’s 3.5-inch diameter W350F fog lights ($150/pr) fit perfect in bumpers. The 55W H3 halogen bulb and 66-degree bar-shaped light beam deliver great low-visibility performance. Hardened clear glass lenses. Impact-resistant polymer housings. Wireless control switch, so there’s no need to run wires through the firewall.


The W700D driving lights ($520/pr) are the biggest and brightest in the Warn HID lineup! At 7-inch-diameter they are 300 percent brighter – and last 10 times longer – than 55W halogens. Integrated ballast for simple installation. Tempered clear glass lenses and impact/corrosion-resistant polymer cases.


At 6.5 inches in diameter, these W650F fog lights ($215/pr) from Warn are for those who want the best and brightest. The bright 55W H3 halogen bulbs, combined with 66-degree bar-shaped light beams and yellow dichroic coating, mean great low-visibility performance. Impact-resistant polymer cases with O-ring seals for excellent water resistance.



Warn’s SDB-160HB ($495/pr) dual-beam driving/spot lights pump out 100,000 candlepower and have an internal light frame to protect the lamps from vibration and shock when running off-road. Dual-beam control includes relay control feature and LED illumination when lamps are in use.


Age plays a significant role in night driving; the older you get, the poorer your night vision. It’s just a fact of life.

Ophthalmologists say the lenses in our eyes aren’t as transparent at age 50 as they were at 20, our pupils don’t dilate as well, and older eyes’ light receptors aren’t as sensitive.

All of these factors add up to decreased low-light vision. In effect, a 50-year-old’s eyesight is like a young person’s wearing sunglasses. Factor in poor driving conditions with aging eyes and it’s easy to see why it’s so important to have really good headlights and auxiliary lights on your pickup.