Tag: dodge

Products
High-Capacity Transmission Oil Coolers
BD’s Xtruded Transmission Oil Coolers use high efficiency Micro Extruded bar technology that provides 22% more cooling over other designs. The 200 Micro Extruded passages provide a large surface area to transfer heat for external air flow cooling while turbulent oil flow design promotes a more complete cooling. A 10-inch thermostatically controlled 800 CFM electric fan offers ultimate automatic oil temperature control. Install packages can accommodate from 5/16 to 5/8 transmission cooler lines and come complete with all fittings, clamps, hoses, hardware and a Build-It-Yourself galvanized bracket kit for quicker and cleaner installation.
May 29, 2015
Opinion
Popular truck ad campaigns provide tips for any business
One goes straight for your heart, the other goes for belly laughs – but both are memorable, popular campaigns to draw attention, and buyers, to a couple of trucks. Their respective methods of marketing madness offer lessons any business can benefit from.
November 1, 2013
Pickups
Chrysler Reports Best July Sales in Seven Years
July U.S. Sales Increased 11 Percent Chrysler Group reports an 11 percent increase from July 2012 in U.S. sales amounting to 140,102 units.  This is the group’s best July sales since 2006. The Jeep, Dodge, Ram Truck and FIAT brands each posted year-over-year gains in July. The Ram Truck’s brand’s 31 percent increase was the largest gain […]
August 1, 2013
Pickups
Gooseneck Hitch
CURT Manufacturing Makes Gooseneck Hitch Installation “EZr” CURT Manufacturing has a new Under-Bed Double Lock EZr Gooseneck Hitch. This hitch comes install-ready with the CURT exclusive center locator. The new EZr hitch, along with the features of the original Double Lock gooseneck, now eliminates the need to lower exhaust on Ford, Chevy and most Dodge […]
June 20, 2013
Pickups
2014 Ram 1500 Diesel
2014 Ram 1500 gets V-6 turbo-diesel; available as early as July
February 14, 2013
Pickups
Smart Session on Water/Methanol Injection
Matt Snow of Snow Performance explains the benefits of water and methanol injection to diesel performance.
December 13, 2012
Pickups
New turbocharger for 2003-2007 Dodge Diesel
advanced Flow engineering is pleased to announce the release the BladeRunner Turbocharger (67mm) for Dodge Diesel Truck 03-07 L6-5.9L (td) (P/N 46-60052) This all new aFe BladeRunner turbocharger supports up to 600HP over the standard Cummins turbocharger while lowering Exhaust Gas Temperatures (E.G.T). The BladeRunner turbocharger is constructed of high quality A356 cast aluminum using a ported shroud compressor housing eliminating turbo bark and compressor surge.
August 11, 2012
Pickups
Light Weight Tool Box for Half Ton Pickups
The Sportsman’s new design features these improved benefits: Hinged aluminum diamond plate rear door that safely secures parts, tools and equipment in the 1000# capacity pull-out drawer, two full length side storage compartments over the wheels are secured with durable, lightweight aluminum diamond plate doors, protective black spray-on liner coats the entire service body inside and out, eliminating scratches, scrapes and potential rust spots, and tie-down rails have been added to the inside top of the sidewalls to provide an easy way to safely secure your load in the bed.
August 11, 2012
Pickups
Eliminate extra keys with the BOLT Padlock 2.0
The BOLT Padlock 2.0 from STRATTEC Security Corporation allows enthusiasts to secure all their gear without the hassle of carrying countless extra keys by permanently programming to lock and unlock using the vehicle’s ignition key.
June 5, 2012
Pickups
Protect your gear, eliminate extra keys with the BOLT Padlock 2.0
Add up the locks for trailers, sheds, gates and jobsite storage and the keys mount up. One key could replace them, which is cool, but it gets better when that key happens to be your ignition key.
May 23, 2012
Pickups
DPF Delete A Double-Edged Sword
The pros and cons of removing your diesel pickup’s DPF exhaust system.
April 20, 2012
Pickups
Light bar for Dodge RAM
This tough and attractive light bar bolts right on using factory mounting locations, is compatible with the factory tow hooks and requires absolutely no drilling, cutting or welding.
April 5, 2012
Page 1 of 6
Next Page