Trucks
Vans
Pickups
Alternative Power
Maintenance
Products
Tag: afe
Products
Cold-side intercooler from aFe boosts hp for Ford diesel V-8s
The aFe Power cold-side intercooler tube offers smooth transition bends designed to decrease turbulence, increase horsepower and torque and reduce exhaust gas temperatures for the 2008-10 Ford Diesel Trucks V8-6.4L.
June 20, 2014
Pickups
Silverado/Sierra HD Intercooler
aFe Power BladeRunner Intercooler is for GM Duramax engines  The new aFe BladeRunner Intercooler for 2011-13 GM Silverado HD/Sierra HD V8-6.6L (td) Duramax engines features a 2.5-inch bar and plate design that is larger than stock, and outflows OE style tube and fin core designs by 38 percent. End tanks are made from […]
May 10, 2013
Pickups
Silverado/Sierra Cat-Back Exhaust
Mach Force XP GM Cat-Back Exhaust  aFe Power’s newest cat-back exhaust fits  2004-07 GM Silverado/Sierras, both V6 and V8 models. In recent testing, this exhaust system produced 9hp and 15lbs. x ft. torque at the wheels. The cat-back design is constructed using 3″ mandrel-bent 409 stainless steel and uses a free-flowing muffler, OE style […]
March 15, 2013
Pickups
aFe Titan Exhaust
Nissan Titan performance cat-back exhaust system adds 26hp according to aFe.
October 16, 2012
Pickups
4” Exhaust System Cat-Back for the F-150
Mach Force XP 4” Exhaust System Cat-Back for the Ford F-150 EcoBoost 20011-12 V6-3.5L (tt) P/N 49-43041-P. This MACH Force XP Cat-Back exhaust system produces 32 horsepower and 29lbs. x ft. torque. This exhaust is constructed using 4″ mandrel-bent 409 stainless steel and comes complete with free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with a high luster polished 304 stainless steel, rolled slash cut tip for an aggressive style.
September 5, 2012
Pickups
New turbocharger for 2003-2007 Dodge Diesel
advanced Flow engineering is pleased to announce the release the BladeRunner Turbocharger (67mm) for Dodge Diesel Truck 03-07 L6-5.9L (td) (P/N 46-60052) This all new aFe BladeRunner turbocharger supports up to 600HP over the standard Cummins turbocharger while lowering Exhaust Gas Temperatures (E.G.T). The BladeRunner turbocharger is constructed of high quality A356 cast aluminum using a ported shroud compressor housing eliminating turbo bark and compressor surge.
August 11, 2012
Pickups
Performance package for Duramax
Maximize the potential of your Duramax with the Performance Package from aFe Power. This performance package includes an intercooler (P/N: 46-20051), intercooler tube: hot side (P/N: 46-20049) and a turbo inlet manifold.
July 26, 2012
Pickups
aFe Ford EcoBoost Stage 2 Intake
The equal length dual tube design with an H-pipe balance tube increases intake air flow and velocity increasing horsepower and improving throttle response and turbo spool times. Enclosed in a durable 16-gauge heat shield that uses the lower half of the factory air box, two 360 degree conical air filters are used for maximum flows.
April 11, 2012
Pickups
2003-2007 Cummins Wastegate Actuator
New Wastegate Actuator for the 2003-2007 Dodge Cummins L6-5.9L
April 4, 2012
Opinion
“Build your own air filter” website
If you are fabricating your own intake system or need to replace your filter on your existing intake, check out the new “Build Your Own Air Filter” engine at www.afepower.com. Simply log on and enter your filter dimensions including flange diameter, base diameter, top diameter, length and type of media (Pro 5R, Pro Guard 7 and Pro Dry S) and you will have your custom filter chosen and ready to order.
February 22, 2012
Pickups
Powerstroke Intercooler
BladeRunner Intercoolers design results in quicker and more measurable heat dissipation. In recent testing the BladeRunner intercooler increased air flow by 40% over stock.
February 8, 2012
Pickups
aFe BladeRunner Intercooler for 2006-2010 GM Duramax
Outflows OE style tube and fin core designs by 48%
November 23, 2011
Page 1 of 3
Next Page